Create Hotdog script to interface between MQTT and the radio

Hotdog.ino

@@ -0,0 +1,119 @@
+#include "arduino_secrets.h"
+#include "HDPacketBuilder.h"
+#include <EspMQTTClient.h>
+#include <RF24.h>   // library by TMRh20
+
+#define SER_BAUDRATE                   (115200)
+
+// pins for: esp8266 NodeMCU v3 dev board
+#define RF_CE_PIN                      (5)  // pins for: esp
+#define RF_CS_PIN                      (15) // pins for: esp
+#define RF_IRQ_PIN                     (4)  // run a jumper from IRQ pin to pin 2
+
+EspMQTTClient client(
+  SECRET_WIFI_SSID,       // Wifi SSID
+  SECRET_WIFI_PASSWORD, // Wifi Password
+  SECRET_MQTT_SERVER_IP,   // MQTT Broker server IP
+  SECRET_MQTT_USERNAME,          // MQTT Username
+  SECRET_MQTT_PASSWORD,    // MQTT Password
+  "hotdog",          // MQTT Client ID
+  1883
+);
+
+byte addr[3] = { 0xC0, 0xC8, 0x2E }; // The address was captured as "2EC8C0" and the bytes were reversed
+
+RF24 radio(RF_CE_PIN, RF_CS_PIN);
+
+void setup() {
+  for (int i = 0; i < 32; i++) {
+    buf[i] = 0x00;
+  }
+
+  Serial.begin(SER_BAUDRATE);
+
+  client.setKeepAlive(10);
+  client.enableLastWillMessage("hotdog/availability", "offline", true);
+  client.enableDebuggingMessages();
+
+  radio.begin();
+  radioTransmitSetup();
+
+  for (int i = 0; i < 32; i++) {
+    buf[i] = 0x00;
+  }
+
+  Serial.println("Ready");
+}
+
+void onConnectionEstablished() {
+
+  client.subscribe("hotdog/test_mqtt_blind/set", [] (const String &payload)  {
+    Serial.print("Set on test_mqtt_blind: ");
+    Serial.println(payload);
+    if (payload == "OPEN") {
+      constructUpPacket();
+      printBuffer();
+      sendCommand(buf);
+    } else if (payload == "CLOSE") {
+      constructDownPacket();
+      printBuffer();
+      sendCommand(buf);
+    } else if (payload == "STOP") {
+      constructStopPacket();
+      printBuffer();
+      sendCommand(buf);
+    }
+  });
+
+  client.subscribe("hotdog/test_mqtt_blind/set_position", [] (const String &payload)  {
+    Serial.print("Set position on test_mqtt_blind: ");
+    Serial.println(payload);
+  });
+
+  client.publish("hotdog/availability", "online", true);
+}
+
+void loop() {
+  client.loop();
+}
+
+void radioTransmitSetup() {
+  radio.stopListening();
+  radio.powerDown();
+  radio.begin();
+  delay(100);
+  Serial.println();
+  radio.setChannel(0x07); //shooting for 2.407 GHz
+  radio.setDataRate(RF24_1MBPS); //can go at 250kbs, 1Mbs, 2Mbs
+  radio.setPALevel(RF24_PA_HIGH); //transmit power
+  radio.disableCRC();
+  radio.setAutoAck(false);
+  radio.setAddressWidth(3);
+  radio.setRetries(0, 0);
+
+  radio.openWritingPipe(addr);
+  radio.powerUp();
+  //radio.printDetails();
+  //radio.printPrettyDetails();
+  Serial.println("Ready to Transmit");
+}
+
+void sendCommand(byte * byteArray) //transmit a command
+{
+  uint8_t bytecount = byteArray[0] + 3;
+  for (int j = 1; j < 5; j++) {
+    radio.setAddressWidth(3);
+    radio.disableCRC();
+    radio.setAutoAck(false);
+    radio.openWritingPipe(addr);
+    for (int i = 1; i < 200; i++) {
+      radio.writeFast(byteArray, bytecount);
+    }
+    delay(500);
+    radio.flush_tx();
+    radio.txStandBy();
+  }
+
+  rollingCode1++;
+  rollingCode2++;
+}